Owner manual
1-2 Introduction
Manuals Supplied
Your Century C-341 Series Dispensing System arrives with manuals for installation and operation of
major system components and software. For some system components, you may receive Original
Equipment Manufacturer (OEM) manuals. Consult only Asymtek manuals unless directed to do otherwise
by the manuals themselves or by the Asymtek Technical Service Group.
Below is a sample list of manuals that may be shipped with your Century C-341 Series Dispensing
System. The optional manuals listed may or may not be included depending on system configuration.
• Century C-341 Series Installation, Operations, and Maintenance Manual
• Easy Coat for Windows NT User Guide
• Fluid Applicator Installation and Operations Manual (specific to your valve)
• Original Equipment Manufacturer Manuals (as applicable)
Training
In order to optimize the full capabilities and features of your dispensing system, Asymtek recommends
certification for all operators, technicians, and engineers using, programming, and servicing the
dispensing system.
Asymtek offers several levels of training courses to enable customer operators, technicians, and engineers
to become fully certified in dispensing system safety, operation, hardware, software, and fluid
applications. For more information on training courses and certification, contact Asymtek.
System Features
Standard Features
• Computer System • Integrated Safety System
• Easy Coat for Windows NT Software • Fluid Reservoir
• Exhaust Vent Duct
Optional Features
• Low Fluid Sensor • Dual Simultaneous Mounting Bracket
• Dual Toggle Mounting Bracket • Flow Monitoring System
Fluid Delivery Method
The Century C-341 Series Dispensing Systems support the following Asymtek Fluid Applicators:
Table 1-1 Fluid Applicators
Model Name
SC-104 Circulating Film Coater, 4-axis
SC-105 Circulating Film Coater, 5-axis
SC-204 Non-Circulating Film Coater, 4-axis
SC-205 Non-Circulating Film Coater, 5-axis
SC-200 Slim Swirl Applicator
SC-300 Swirl Coat Applicator