Owner manual
5-4 Maintenance
Emptying the Water Trap
Moisture from the outside air can condense in the pneumatic system. The Water Trap collects this
condensed moisture. You must empty it weekly or whenever it is full.
To empty the Water Trap:
1. Disconnect the facility air supply from the Main Air Inlet.
2. Hold a container under the Water Trap to catch the water.
3. Using your finger, push the water drain knob at the bottom of the assembly.
4. Reconnect the facility air supply to the Main Air Inlet.
Item Description
1 Water Trap
2 Drain Knob
Figure 5-2 Water Trap
1
2