Owner manual

Operation 4-7
Tooling Rail Operation
The Century C-341 features easily adjustable tooling rails to secure the workpiece in place.
Adjusting the Tooling Rails
To adjust the tooling rail width:
1. Loosen the front and rear L-handles.
2. Slide the rails to the desired position.
! The workpiece should fit securely between the rails.
3. Tighten the L-handles.
To adjust the tooling rail length:
1. Loosen the stops on the inside edge.
2. Slide the stop to the desired position.
! The workpiece should fit securely.
3. Tighten the stops.
Item Description
1 L-Handle
2 Tooling Rail
3 Stop
Figure 4-3 Adjusting the Tooling Rails
3
1
2