Owner manual

3-8 Installation
4. Select Configure>Reconfigure from the ECNT Edit Screen.
! The Configure Dialog Box opens. See
Figure 3-4.
Figure 3-4 ECNT Configure Dialog Box
5. Select the item to be configured by clicking on it.
" NOTE To select more than one item, hold down the CTRL key while selecting
additional items.
6. When you are finished, click on
OK.
! The software must be restarted in order to perform the configuration.
7. To close the ECNT Edit Screen and return to the Operator Screen, click on
or select
File>Exit from the menu bar.
8. To exit ECNT, click on
or select File>Exit from the Operator Screen menu bar.
9. Restart ECNT to perform the configuration procedure. ECNT will prompt you to answer a
series of questions defining your system configuration.
" NOTE Prompts will vary depending on the items selected and answers to previous
prompts. ECNT menu choices may vary depending on the answers to the
prompts. Refer to the ECNT Users Guide or Online Help for additional
information.
10. Once you have responded to all the prompts, the ECNT program will start.