User Manual

6
Front Cabinet
Item No. Component Description
1
Precision Fluid Air
Regulator and Gauge
The Valve 1 Fluid Air Regulator and Gauge set consists of a
precision regulator and a digital gauge and controls air pressure for
the Dispensing Valve 1 fluid syringe on the Dispensing Head. There
is also a Valve 2 Fluid Air Regulator and Gauge set used for
systems configured with the Dual-Action Dispensing Head. Each
Fluid Air Regulator receives air from the Main Air Regulator located
on the back panel of the dispensing system.
2
Valve Air Regulator
and Gauge
The Valve Air Regulator and Gauge controls the air pressure
supplied to the Dispensing Valve.
3
Flowmeters for
Impingement Tooling
Individual flowmeters are provided for each station to adjust the air
flow for each heater.
4
Tooling Air Regulator
and Gauge
The Tooling Air Regulator and Gauge controls the air pressure being
supplied to the conveyor stop pins and lift tables/clamp bars. The
regulator receives air from the Main Air Regulator located at the
back of the dispensing system.
5 Computer
The industry-standard Computer runs the Fluidmove dispensing
software, enables programming and production operations, and
controls all major components.
6
Conveyor/Heater
Controller
The Conveyor/Heater Controller manages all conveyor-related
functions. Systems equipped with dual-lane conveyors will have two
conveyor controllers one for each lane. The second conveyor
controller is connected to the COM1 port of the computer.
Figure 1-4 Front Cabinet
1
3
2
4
5
6