User Manual

Dual Conveyors

Item No. Component Description

1 Board Sensor

Fiber-array Board Sensors mounted on top of the conveyor rail

detect the presence of the workpiece at each conveyor station and

report it to the Conveyor Controller.

2 Stop Pin

The Stop Pins are pneumatic devices that physically stop the

workpiece at a specific conveyor station. The Conveyor Controller, in

conjunction with the Fluidmove software, controls the stop pins.

3 Conveyor Rails

The Conveyor 1 front rail is fixed. The Conveyor 2 front rail is

manually adjustable to allow pitch variations between Conveyor 1

and Conveyor 2. Conveyor 1 and Conveyor 2 rear rails move

independently toward the back and front of the dispensing system.

Figure 1-3 Dual Conveyor (Close-up)