User Manual

3
Figure 1-1B Operator Controls (Close-up)
Table 1-1 Front View Features
Item No. Component Description
1 Light Beacon
The Light Beacon is a warning device for the operator. The beacon
signals a dispensing status condition by displaying a colored light and/or
issuing an audible tone. Refer to the Axiom X-1000 Operations Manual
for additional information.
2 Hood/Window
The Hood/Window allows access to the dispensing area. Opening the
hood/window during a production run activates the interlock safety
feature, which disables all dispensing head motion. Dispensing may be
adversely affected if the hood/window is opened during actual
dispensing.
3 Monitor
The LCD Flat-Panel Monitor provides the operator with Fluidmove
software displays and a view of the work area through the system
camera.
4
Front Emergency
Machine Off
Button (EMO)
The EMO button is a built-in safety feature located on both the front
panel and back panel of the dispensing system. Activating the EMO
vents all pressure in the pneumatic system, de-energizes the servo
power supply capacitors, and cuts power to all system components
except the computer and monitor.
5 Mouse/Keyboard
The computer system is equipped with an optical mouse and an
ASCII-compatible keyboard.
6
ESD Grounding
Strap Connectors
Grounding straps worn by the operator or technician plug into these
jacks to prevent electrostatic discharge (ESD) damage to workpieces
and dispensing system electronics during dispensing operations and
servicing.
7 ON/OFF Buttons
The ON and OFF buttons are momentary push buttons located on the
left side of the operator’s console. When pressed, the green ON (l)
button illuminates and switches on power to the dispensing system
mechanics. When the OFF (0) button is pressed, the dispensing activity
shuts down and the air pressure is vented, but the computer and monitor
power is not affected.
8
Dual Lane
Conveyors
The Dual Lane Conveyors allow parts to be conveyed from upstream
systems, to the dispensing station, and then to downstream systems.
Both conveyors are SMEMA compatible and have an adjustable rear rail.
4
7
5
6