User Manual

1
1 Introduction
Overview
This addendum addresses additional information necessary for configuring, operating, and programming
the Axiom X-1022 Dual Conveyor Dispensing System and covers the following topics:
•
System Features • Positioning the Conveyor
•
Dual Conveyor Setup • Fluidmove Programming for Dual Lane Systems
•
Theory of Operation
Refer to the Axiom X-1000 Series Operations Manual, the Axiom X-1000 Series Installation and Service
Manual, and the Fluidmove User Guide for additional information.
Safety First
Operation of your Axiom X-1022 Dispensing System involves heat, air pressure, electrical power,
mechanical devices, and the use of hazardous materials. It is essential that personnel servicing or
operating the dispensing system fully understand all hazards, risks, and safety precautions. Refer to the
Safety section of the Axiom X-1000 Series Operations Manual for additional information.
Specifications
Refer to the Axiom X-1000 Series Installation and Service Manual for system specifications.
Maintenance and Troubleshooting
Recommended maintenance and troubleshooting procedures are described in the Axiom X-1000 Series
Operations Manual and the Axiom X-1000 Series Installation and Service Manual.
System Features
The X-1022 Dispensing System comes fully equipped with all features of the standard X-1000 Dispensing
System. In addition to the basic X-1000 features, the X-1022 is equipped with the following:
• A second conveyor
• A second conveyor controller
• Six (6) lift table/heating stations
• An additional pneumatics block
In addition to the features above, the X-1022 includes:
• Additional interconnect cabling and power cords to accommodate the additional conveyor
controller, heating station, and conveyor components.
• Heater cartridges that operate at 600 watts each without the need for a second input
power source.
System components are shown in
Figure 1-1 through Figure 1-7. The item numbers associated with the
descriptions correspond to the callout numbers in the illustrations. Refer to the Axiom X-1000 Series
Operations Manual for detailed descriptions and operating instructions.