User Manual

16
Figure 3-4 Teach Workpiece Origin
5. Use the position controls to move the dispensing head to the Workpiece (program) origin.
6. Click on Teach and then on Done.
! A Teach Window opens asking you to “Teach Substrate Height." See Figure 3-5.
Figure 3-5 Teach Substrate Height
7. Use the position controls to move the dispensing valve to the appropriate substrate height.
8. Click on Teach and then on Done.
9. You will then be prompted to run machine offsets.
10. When complete, the Programming Window (Figure 3-6) opens.
! All Fluidmove programs contain a Workpiece pattern. The Workpiece pattern may contain
dispensing commands as well as commands to execute additional patterns.