User Manual

Creating a Program for Dual Lane Conveyor Systems

" NOTES Programming setup is a recommended routine to be performed prior to beginning a

programming session. Programming setup consists of defining fluid and vision files,

setting workpiece alignment options, and defining fiducials.

For more information on programming setup and defining fiducials, refer to the

Fluidmove User Guide or Online Help.

To create a basic program:

1. Select Teach a Program from the Fluidmove Main Menu.

! The Programming Window opens. The last loaded program also opens.

2. To create a new program, select File>New from the menu bar or click on the Program

Wizard

icon.

! The Create Workpiece dialog box (Figure 3-3) opens.

Figure 3-3 Create Workpiece Dialog Box

" NOTE In this example, we will not define fiducials. When creating your own program, select the

fiducial setup alignment that best fits your pattern type. If your pattern contains Skip

Marks, activate the Use Pattern Skip Mark feature.

3. In the Fiducials section of the Window, select None.

4. Click OK.

! A Teach Window opens asking you to “Teach Workpiece Origin.” See

Figure 3-4.