User Manual

13
" NOTE The following procedures assume that the dispensing system and computer have been
turned on as specified in the Axiom X-1000 Series Operations Manual.
To operate position controls with the Mouse:
1. In the Fluidmove Main Window, click on Jog.
! The Position Controls dialog box opens. See Figure 3-2.
2. Click on the Conveyor 1 radio button to activate the Conveyor 1 position controls, click on
the Conveyor 2 radio button to activate the Conveyor 2 position controls, or click on the
Dispenser radio button to activate the Dispensing Head position controls.
" NOTE The selected jog device is indicated in the bottom right-hand corner of all major windows.
Conveyor 1 Conveyor 2
Item Description
1 Conveyor 1 Y-axis Controls (rear rail forward and backward movement)
2 Conveyor 1 X-axis Controls (belt left and right movement)
3 Radio Buttons (Conveyor 1 selected)
4 Radio Buttons (Conveyor 2 selected)
5 Conveyor 2 X-axis Controls (belt left and right movement)
6 Conveyor 2 Y-axis Controls (rear rail forward and backward movement)
Figure 3-2 Conveyor Position Controls
2
1
3
4
5
6