User Manual

12
3 Operation
Theory of Operation
The X-1022 Dispensing System generally operates the same as the standard X-1000 Series systems with
the exception of the conveyor movement.
Positioning the Conveyor
When necessary, an operator can use Fluidmove position (jog) controls to adjust conveyor rail width for
each conveyor, reposition the workpiece X-axis location on the conveyor, and reposition the dispensing
head in the X, Y, and Z-axes. The Conveyor 1 front rail is fixed. The Conveyor 2 front rail is manually
adjustable to allow pitch variations between Conveyor 1 and Conveyor 2. Both of the rear rails move
independently toward the back or front of the machine. See
Figure 3-1.
Item Description
1 Conveyor 1 Front Rail (Fixed)
2 Conveyor 1 Rear Rail (Adjustable)
3 Conveyor 2 Front Rail (Adjustable)
4 Conveyor 2 Rear Rail (Adjustable)
Figure 3-1 Conveyor (Close-up)
1
2
3
4