Installation Manual

Power-up and Testing 5-35
Item Description
1Post Nut
2 Leveler (foot)
3 1 1/2-Inch Wrench
4 Lock Nut
Figure 5-18 Leveler Adjustment
10. Once the dispensing system is level from front-to-back, side-to-side, and is stable with all
four feet bearing the weight equally, tighten the 1 1/2-inch Lock Nuts.
CAUTION! In the final leveled and aligned position, there should be no more than
three inches of Leveler Post showing between the bottom of the dispensing
system and the foot.
11. Close the dispensing system Hatch.
12. Perform a Post-Service Start-up as specified in the Safety section of this manual.
1
4
3
2