Installation Manual

5-34 Power-up and Testing
8. Check the system for stability by putting your hands on top of the dispensing system in one
corner and pressing down. If one Leveler is lower or higher than the others are, the
dispensing system will rock back and forth. Adjust the Levelers so that they are all bearing
the weight equally.
9. Re-level the dispensing system from side-to-side and from front-to-back, if necessary.
Item Description
1 Box Level
2 Y-rail (front)
3 X-beam (center)
Figure 5-17 Leveling the Dispensing System
1
2
3