Installation Manual

5-12 Power-up and Testing

2. Open the side door of the Computer and locate the green power LEDs in the upper left-hand

corner of the Main Interface Board. See Figure 5-6.

> All of the green power LEDs should be illuminated.

Item Description

1 Computer

2 Main Interface Board

3 Power LEDs

Figure 5-6 Power LED Location on the Main Interface Board

3. If your system is equipped with a Scale, verify the green power LED on the Scale Interface

Box behind the Computer is illuminated.

4. Remove the Servo Shelf Cover from the back of the dispensing system if not

already removed.

WARNING! CAUTION!

Touching electrical components inside the Computer may cause electrical shock

injury. In addition, make sure that you observe ESD precautions to prevent

damage to sensitive electrical components.