Installation Manual

4-2 Component Installation
5. Locate the dark gray Power Cable coming from underneath the Monitor Swing Arm and
securely connect it to the Monitor as shown in Figure 4-1.
6. Locate the power switch on the back of the Monitor and turn it
ON (I).
7. Pivot the Monitor on the Monitor Swing Arm to verify that there is sufficient slack in
the Cables.
8. Make sure the Monitor is in a position that will not interfere with the opening of the Hatch.
Item Description
1 Monitor
2Power Switch
3 Power Cable
4 Swing Arm
5 Mount Block
6 Video Cable
Figure 4-1 Monitor Installation
6
4
3
2
1
5