Installation Manual

Appendix D D–5
Product Name: Moly-Graph® Extreme Pressure Multi-Purpose Lithium Grease
Product Number (s): SL3141, SL3144, SL3145, SL3146, SL3330, 8SL3141
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % BY Wt.
Hydrotreated heavy naphthenic distillates 64742-52-5 70 - 90
Lithium 12-hydroxystearate 7620-77-1 5 - 10
Zinc, dithiophosphate di-C1-14-alkyl esters 68649-42-3 0.5 - 1.5
Molybdenum sulfide 1317-33-5 0.2 - 1
Graphite 7782-42-5 0.2 - 1
Section 4: First Aid Measures
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation
persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap and water.
Call a physician if irritation persists. Wash contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing, give artificial
respiration. If breathing is difficult give oxygen. Call a physician.
Ingestion: Do not induce vomiting. Seek medical attention.
Note to Physicians:
None available
Section 5: Fire-Fighting Measures
Flammable Properties: This product is nonflammable.
Flash Point: >400F (COC) Upper Explosive Limit: 7.0
ND Lower Explosive Limit: 0.9
Suitable Extinguishing Media: CO2, dry chemical, sand, dolomite, alcohol resistant foam, water spray
Products of Combustion: Oxides of carbon. Sulfur.
Protection of Fire-Fighters: Firefighters should wear self-contained, NIOSH-approved breathing
apparatus for protection against suffocation and possible toxic
decomposition products. Proper eye and skin protection should be
provided. Use water spray to keep fire-exposed containers cool and to
knock down vapors which may result from product decomposition.
Avoid water in straight hose stream as it will scatter and spread fire.