Installation Manual

Appendix D D–3
MSDS - MULTEMP PS NO 2-A 07-350 (Continued)
SECTION VII - Precautions for Safe Handling and Use
Steps if Material Released/Spilled
TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE W/ AN INERT
MATERIAL SUCH AS EARTH, SAND, &
VERMICULITE. SWEEP UP & DISPOSE SOLID
WASTE IN ACCORDANCE W/ LOCAL, STATE &
FED REGS
Waste Disposal Method
DISPOSE OF IN ACCORDANCE W/ STATE,
LOCAL & FED REGS. INCINIRATE IN ACCORD.
W/ APPLICABLE REGS. MATERIAL MAY BE
RECOVERED & RECYCLED
Handling and Storage Precautions
KEEP CONTAINER CLOSED UNTIL READY FOR
USE. STORAGE AWAY FROM FIRE SOURCE OR
SUNLIGHT & IN COOL DRY AREA
Other Precautions
DO NOT USE PRESSUE TO EMPTY
CONTAINER. WHEN EMPTY, CONTAINER MAY
HAVE VAPOR OR PRODUCT RESIDUE. DO NOT
CUT, PUNCTURE OR WELD ON OR NEAR THE
DRUM
SECTION VIII - Control Measures
Respiratory Protection
GOOD VENTILATION SHOULD BE SUFFICIENT
Ventilation
GOOD GENERAL VENT. SHOULD BE
SUFFICIENT
Protective Gloves
RUBBER OR PLASTIC OIL RESISTANT
Eye Protection
CHEMICAL SAFETY GOGGLES & IF HANDLED
HOT, FULL FACE SHIELD
Other Protective Equipment
NONE
SECTION IX - Label Data
Protect Eye
NO
Protect Skin
NO
Protect Respiratory
NO
Chronic Indicator
UNKNOWN
Contact Code
UNKNOWN
Fire Code
UNKNOWN
Health Code
UNKNOWN
React Code
UNKNOWN
SECTION X - Transportation Data
SECTION XI - Site Specific/Reporting Information
Volatile Organic Compounds (P/G)
0
Volatile Organic Compounds (G/L)
0
SECTION XII - Ingredients/Identity Information
Ingredient #
01
Ingredient Name
*REFINED MINERAL OIL
CAS Number
101316727
Percent
25