Installation Manual

Uncrating and Placing 3-3
6. When the four Foot Restraint Brackets have been removed, slide the forklift forks under the
front of the dispensing system between the Levelers (feet). Use the forklift to gently lift the
dispensing system off of the crate.
CAUTION! Lift the dispensing system from the front only. Attempting to lift the dispensing
system from the back or sides may cause serious damage. Place forks between
the front feet, making sure that the blades reach from front to back.
7. Move the dispensing system such that it is clear of the crate and gently lower it onto the
facility floor.
8. Remove all shrink-wrap and other packing material from the perimeter of the
dispensing system.
Item Description Item Description
1 Foot Restraint Bracket 5 Lag Bolts and Washers
2 Hex Head Screws and Washers 6 Hex Nuts and Washers
3 Leveler (foot) 7 Post Nut
4 Machine-to-Crate Shipping Bracket 8 Lock Nut
Figure 3-1 Removing the Shipping Brackets
8
1
4
5
6
2
3
7