Installation Manual
Parts Replacement 10-49
6. Remove the nine 3-mm socket head cap screws holding the XY Servo Interface PWA
in place.
TIP Note the orientation of the XY Servo Interface PWA to make reinstallation easier.
7. Remove the XY Servo Interface PWA from the Servo Shelf.
? NOTE The faulty XY Servo Interface PWA should be returned to Asymtek.
Refer to “Return Material Authorization” in this section for merchandise
return instructions.
Item Description
1 Alignment Pins
2 Servo Shelf Cover
3 Captive Slotted Thumbscrews
Figure 10-22 Removing/Installing the Servo Shelf Cover
32
1