Installation Manual

Parts Replacement 10-39

6. Disconnect the cables:

a. From the rear of the PMAC Card.

b. From J2 and J4 on the PMAC Daughter Card.

c. From J2, J5, and J7 on the PMAC Card.

7. Remove the small Phillips head screw from the PMAC Card Hold-down Clip.

8. Gently pull up on the PMAC Card and remove it from the slot.

? NOTE The faulty PMAC Card should be returned to Asymtek. Refer to “Return

Material Authorization” in this section for merchandise return instructions.

Item Description

1 Video Card (P/N 194702) (Slot 7)

2 Image Capture Card (P/N 59-0018) (Slot 6)

3 PMAC Card (P/N 07-0735-01) (Slot 1)

Figure 10-18 Removing/Installing Computer Cards