Installation Manual

Parts Replacement 10-13
5. Tighten the clamp screw.
> Do not use removable thread locker.
6. Reinstall the Access Hatch Cover on the back of the dispensing system.
7. Perform a Post-Service Start-up as specified in the Safety section of this manual.
Item Description
1 Access Hatch
2Clamp Screw
3 Rear Clamp Bracket
4 Valve Manifold
5 Hook on Valve End Plate
6 Solenoid Valve
Figure 10-5 Pneumatic Solenoid Valve Replacement
6
2
5
4
1
3