Installation Manual
8-118 Troubleshooting
20. Verify continuity of the SMEMA Downstream Cable (P/N 06-4644-00), routed between Conveyor
Controller and the Rear Bulkhead of the dispensing system. Pin connections are specified in
Table 8-36.
Table 8-36 SMEMA Downstream Cable Pin Connections
P1 Color P2
1BlackN/C
2White 1
3 Red 10
4 Green 2
5Brown12
6Blue 4
7 Orange 11
8Yellow 9
9Purple 3
Shell Shield 8
21. Is there continuity?
SMEMA Downstream Cable (P/N 06-4644-00) has
failed. See
Parts Replacement section.
Conveyor Controller (P/N 62-1677-00 on X-1020, or P/N 62-1676 on X-1010)
has failed. See Parts Replacement section.
22. If applicable, reinstall the Conveyor Controller Cover.
No
Yes