Installation Manual

Injury to Personnel
If an injury occurs during operation or servicing of the dispensing system, it is recommended that the
following steps be taken:
1. If the dispensing system is operating when the injury occurs, press the nearest EMO button to
stop all system operations.
2. Immediately report injury to Supervisor in accordance with facility procedures.
3. If it is an injury due to exposure to a hazardous material, refer to the treatment
recommendations on the material manufacturer’s MSDS.
4. Seek medical help if necessary.
ESD Precautions
CAUTION! Personnel operating, maintaining, or servicing the dispensing system must follow
ESD precautions. Failure to do so could cause severe damage to dispensing
system electronic components and/or workpieces.
Electrostatic Discharge (ESD), also known as “static discharge,” is the sudden transfer of electricity
from one object or person to another object or person. ESD can cause severe, undetectable damage to
electronic printed wiring boards (PWB), parts, and assemblies. Precautions, such as wearing grounding
straps, must be taken by the operator or technician to prevent ESD damage while working around
ESD-sensitive components.
2-4 Safety