Installation Manual

Troubleshooting 8-47

10. Can the Dispensing Head be moved in X and Y axes with the Jog keys [Ctrl + Shift + Arrow keys] on

the Keyboard?

Go to Step 11

Stop here. Dispensing Head initialization is root cause of Servo

Amplifier fault.

11. Does the green Beacon light illuminate when the Front Hatch is closed?

Go to “Light Beacon Signal Verification” in 8.1.4,

Interlock Fault Isolation Procedure

Go to Step 12

12. Is the red SRVO_PWR LOW LED on the XY Servo Interface PWA not illuminated when the Front

Hatch is closed?

Go to 8.1.4, Interlock Fault Isolation Procedure

Go to Step 13

13. Does a Door open message appear in the bottom left corner of the FmNT window when the Front

Hatch is closed?

Go to 8.2, Troubleshooting the Servo Controller

Go to 8.1.4, Interlock Fault isolation Procedure

Yes