Installation Manual

8-32 Troubleshooting
8.1.4 Interlock Fault Isolation Procedure
The Interlock Fault Isolation Procedure consists of the following:
• Interlock Power Verification
• Interlock Switch Verification
• Interlock Switch Cabling Verification
• Hatch Open Signal Verification
• Servo Low Power Signal Verification
• Light Beacon Signal Verification
Before troubleshooting a problem, please familiarize yourself with the important information provided in
the Safety section of this manual.
WARNING! A dispensing system in need of troubleshooting may have High Voltage present
in both designated and unsuspected places that can result in injury or death.
Adhere to safety precautions listed in the Safety section of this manual.
WARNING! Disconnect and lockout power to systems connected to the dispensing system
(such as loaders and ovens) before troubleshooting. Failure to do so may result
in serious injury or death.
CAUTION! Troubleshooting should only be performed by an Asymtek Field Service Engineer
or an Asymtek-trained service technician.