Installation Manual

8-28 Troubleshooting

Vent Switch Faker Verification

1. Switch the Main Circuit Breaker to the

OFF (0) position.

2. Reconnect the Cable (P/N 06-4515-00) to the Power Control outlet on the Power Manager.

3. Verify the Vent Switch Faker (P/N 194034) is connected to J9.

4. Is the Vent Switch Faker connected?

Install Vent Switch Faker (P/N 19034) and then go

to Step 5.

Go to Step 5

5. Verify the continuity of the Vent Switch Faker pins is as specified in Table 8-14.

Table 8-14 Vent Switch Faker Pin Connections

Pin Connections

Pin 1 to Pin 2

Pin 3 to Pin 4

6. Is there continuity between the pins specified in Table 8-14?

Vent Switch Faker (P/N 19034) has failed.

See

Parts Replacement section.

Power Manager (P/N 62-1620-01) has failed. See

Parts

Replacement

section.

Operator’s Console OFF (0) Button Verification

1. Reconnect the Cable (P/N 06-4515-00) to the Power Control outlet on the Power Manager.

2. Verify the

OFF (0) button on the Operator’s Console is assembled and connected to the

Cable (P/N 06-4515-00).

3. Verify continuity of the

OFF (0) button pins specified in Table 8-15.

Table 8-15 Off Button Cable Connections

Off Button Cable

Connector

Wire Color

Pin 1 to Pin 2 Black to White

Pin 2 to Pin 4 Red to Green

Yes