Installation Manual

8-26 Troubleshooting
10. Is there continuity between the pins specified in Table 8-10?
Front EMO Button (P/N 40-0016 and P/N 40-2521)
has failed. See
Parts Replacement section.
Power Controls Cable (P/N 06-4515-00) has failed. See
Parts
Replacement
section.
Rear EMO Button Verification
1. Reconnect the Cable (P/N 06-4515-00) to the Power Control outlet on the Power Manager.
2. Verify the Rear EMO Cable is connected to the Rear EMO Button.
3. Verify the wiring to the Rear EMO Button specified in Table 8-11.
Table 8-11 Rear EMO Cable Connections
Rear EMO Cable
Connector
Wire Color Rear EMO Button
Pin 1 Black Pin 11
Pin 2 White Pin 12
Pin 3 Red Pin 21
Pin 4 Green Pin 22
4. Is the wiring as specified in Table 8-11?
Go to Step 5
Go to Step 9
5. Correct the wiring of the Rear EMO Button by changing connections in accordance with Table 8-11.
6. Switch the Main Circuit Breaker to the
ON (I) position.
7. Press the green
ON (I) button on the Operator’s Console.
8. Does the green
ON (I) button on the Operator’s Console stay illuminated?
Go to Step 9
Stop here. Rear EMO cable is the root cause of system power fault.
No
Yes
No
Yes
No
Yes