Installation Manual

8-14 Troubleshooting

4. Is there 208 to 240 VAC at the facility power outlet?

Resolve facility power and then go back to Step 2.

Go to Step 5

5. Connect the System Power Cable to the facility power outlet.

6. Is there 208 to 240 VAC at the Cable Connector?

System Power Cable (P/N 06-4500-00 US, or

P/N 06-4501-00) has failed. See

Parts

Replacement

section.

Power Manager (P/N 62-1620-01) has failed. See

Parts Replacement

section.

7. Confirm the Computer Power Switch is in the ON (I) position.

8. With the Computer Power Switch in the

ON (I) position, is the green power LED illuminated?

Go to Step 9

Go to Step 21

? NOTE Refer to “Facility Requirements” in the Introduction section of this manual. The system

may have sustained damage because of incorrect facility power provision. If under

warranty, inform Asymtek Technical Support.

9. Is the Computer Power Cable (P/N 193949) securely connected to one of the unswitched Power

Manager Outlets AC1 or AC2?

Correctly install Computer Power Cable and then

go back to Step 8.

Go to Step 10

10. Open the Lower Front Cabinet Door.

11. Open the Computer Door.

Yes