Installation Manual

Troubleshooting 8-1
8 Troubleshooting
Overview
This section will help determine the origin of problems you may experience with your Axiom X-1000
Series Dispensing System and recommended corrective actions.
? NOTE This section assumes the operator has already performed basic troubleshooting specified
in the “Troubleshooting” section of Axiom X-1000 Series Operations Manual.
If you experience problems not listed in this section, or continue experiencing the problem after trying the
suggested corrective actions, please contact Asymtek Technical Support for advanced fault diagnostics.
TIP You may want to contact your nearest Asymtek Regional Support Center (RSC) for
dispensing system problems that may be attributed to fluid selection, dispensing
applications, or programming.
Safety First
Before troubleshooting, please familiarize yourself with the important information provided in the Safety
section of this manual.
WARNING! A dispensing system in need of troubleshooting may have high voltage present in
both designated and unsuspected places that can result in personal injury or
death. Follow the safety precautions listed in the Safety section of this manual.
WARNING! Before troubleshooting, disconnect and lock out power from adjacent systems
connected to the Dispensing System such as loaders and ovens. Failure to do so
may result in serious injury or death.
CAUTION! Troubleshooting should only be performed by an Asymtek Field Service Engineer
or an Asymtek-trained service technician.