Installation Manual

Introduction 1-1
1 Introduction
Overview
This manual is an instructional guide to be used by trained service technicians for the installation, service,
and maintenance of the Axiom X-1000 Series Dispensing System. This manual is organized into sections
containing procedures for installation and procedures for service and maintenance as follows:
Installation Sections
 Uncrating and Placing the Dispensing System
 Component Installation
 System Power-Up
 Post-Installation Testing
Service and Maintenance Sections
 Calibration and Adjustment
 Theory of Operation
 Troubleshooting
 Maintenance
 Parts Replacement
 Appendixes: Block Diagrams, Schematic Diagrams, Exploded Parts Drawings, Material
Safety Information, and Installation Checklist
Safety First
In order to prevent injury to personnel and damage to the dispensing system, please review the Safety
section of this manual before performing any of the procedures contained in this manual. If you have any
questions or comments, contact Asymtek Technical Support.
WARNING! The installation and service procedures in this manual should only be performed
by trained service technicians.