Owner manual

4-14 Operation
Table 4-4 Control Buttons and Switches
Button/Switch Description
EMO Button
Pressing this button causes the power manager to power down potentially
hazardous electrical and pneumatic energy sources in the system. The
computer and the monitor remain operational.
Turn in the direction of the arrows to reset.
WARNING! Although the system has been powered down, heater
tooling and needle heaters still present a thermal hazard until they cool.
ON (l) - OFF (l)
Buttons
Controls power to major system components. Below the buttons are two
grounding strap jacks.
I = ON
0 = OFF
I
O
Main Circuit
Breaker
Controls facility power entering the dispensing system and protects the system
from overvoltage.
I = ON
0 = OFF