Owner manual

Operation 4-9
Table 4-1 Dispenser Position Controls
Item Name Description
1 Target Box
Clicking in the Target Box moves the Dispensing Head to the corresponding
position in the dispensing area.
2
XYZ
Coordinates
Displays the current Dispensing Head position coordinates.
3
Y-axis Controls
(move front/back)
Slow Backward (small increments)
Fast Backward (large increments)
Slow Forward (small increments)
Fast Forward (large increments)
Notes: On DispenseMate
®
Systems, the tooling plate moves in the Y-axis.
4
X-axis Controls
(move left/right)
Slow Right (small increments)
Fast Right (large increments)
Slow Left (small increments)
Fast Left (large increments)
5
Dispenser
Radio Button
Click the radio button to activate jog controls for the Dispensing Head.
6
Z-axis Controls
(move up/down)
Slow Upward (small increments)
Fast Upward (large increments)
Slow Downward (small increments)
Fast Downward (large increments).
Note: Refer to Section 7 – Specifications for default motion increment values.