Owner manual

Component Description 3-41
3.12.3 SECS/GEM Interface Software
The SECS/GEM Interface software (see Figure 3-27) allows the dispensing system’s Fluidmove software
to communicate via Ethernet with factory management software running on a host computer connected to
the network. Contact Asymtek or an authorized distributor for more information.
Figure 3-27 SECS/GEM Tab in FmNT Run Window
3.12.4 CADImport Software
 NOTE Available on Axiom X-1010 Dispensing Systems only.
Optimal delivery of a wide range of surface mount adhesives and solder pastes can be achieved with
CADImport software used in conjunction with Asymtek’s exclusive Fluidmove software (FmNT or
FmXP). With the CADImport utility, the operator, working offline, can quickly and efficiently develop a
dispensing program using an existing CAD-generated file, or an ASCII file from a component placement
machine. CADImport uses the original CAD data to learn the type and location of each component. It
then creates a Fluidmove program that contains both the dispense pattern and positions for either “solder
dots” or “adhesive dots.” The data required for correct import is the X-Y location, rotation, component
designator, and component type (size) in delimited ASCII format.