Owner manual

3-34 Component Description
3.9.2 DJ-9000 Series Nozzle Thermal Control Assembly
The thermal control assembly (TCA) (Figure 3-20) is an integral part of the DJ-9000 Series DispenseJet.
It maintains a constant fluid temperature by using both a heating element and cooling airflow. To operate
the TCA, refer to 4.6.2 Thermal Control Assembly Operation. Refer to Section 7 – Specifications for TCA
performance specifications.
3.9.2.1 Thermal Control Assembly Installation
The TCA is part of the DJ-9000 and does not need separate installation. However, the cooler air and
electrical power for the jet must be connected to the dispense head bulkhead as shown in Figure 3-20.
Figure 3-20 DJ-9000 Thermal Control Assembly