Owner manual

Component Description 3-33
3. Loosen the thumbscrew on the side of the heating element. See Figure 3-19.
4. Slide the heating element onto the Luer lock adapter.
5. Tighten the thumbscrew on the side of the heating element.
CAUTION! Do not over-tighten the thumbscrew or the Luer lock adapter may be damaged.
6. Connect the power cable to the outlet labeled NEEDLE HEATER on the dispensing head
electrical/pneumatic bulkhead. See Figure 3-19.
7. Close the hatch and press
ON (l) on the operator’s console.
Item Description Item Description
1 Electrical Connector on Bulkhead 3 Heating Element
2 Power Cable 4 Thumbscrew
Figure 3-19 Needle Heater Location
2
1
3
4