Owner manual

3-16 Component Description
3.6 Vision System
The vision system for your Axiom X-1000 Dispensing System features an ITI Pattern Recognition
System with variable red/blue LED lighting. This Vision System is compatible with Asymtek’s
Fluidmove
dispensing software.
The Pattern Recognition System allows the definition of both global and local fiducials and automatically
corrects the dispensing process for workpiece misalignment. Global fiducials compensate for low-
tolerance fixtures. Local fiducials compensate for skew on individual parts within each fixture. Pattern
recognition and display is accomplished with an image capture card and a video component of the
Computer’s mother board (see Figure 3-8).
Refer to Section 7 – Specifications for vision system specifications.
3.6.1 Vision System Components
Vision System components shown in Figure 3-8 and described in Table 3-8, are installed at the Asymtek
factory prior to shipping. Except for replacing the Camera lens, it is recommended that only a trained
service technician should install Vision System components.
Figure 3-8 Vision System Components
1
3
5
6
4
2