Owner manual

Component Description 3-11
Table 3-5 Rear View Features
Item Name Description
1 Light Beacon
A device that visually and audibly indicates system operating status.
It has red, yellow, green, and blue status indication lights that can be
solid or flashing. Refer to Section 2 – Safety for additional
information.
2
Side Air Exhaust Vent
(passive)
Allows heat from servo shelf components to be exhausted to
atmosphere to prevent overheating. Airflow is provided by an intake
fan on the opposite side of the servo shelf as shown in Figure 3-1.
3
Cooling Fan
(air exhaust)
Exhausts heat and volatile organic compounds (VOCs) from the
dispensing chamber to protect system components and workpieces.
4
Top Air Exhaust
Vents/Fans
Exhausts heat and volatile organic compounds (VOCs) from the
dispensing chamber.
• X-1010 – Air vents
• X-1020 – Two exhaust fans
5
Servo Shelf
Safety Cover
Allows access to the electrical and pneumatic components inside.
Only trained service technicians should remove this cover.
Refer to Section 2 – Safety for electrical safety information.
6
XY Servo Motor
Safety Cover
Protects personnel from inadvertent contact with the high-voltage
X and Y servo motors.
Only trained service technicians should remove this cover.
Refer to Section 2 – Safety for electrical safety information.
7 Rear EMO Button
A built-in safety feature. Activating the EMO vents all pressure in the
pneumatic system, de-energizes the servo power supply capacitors,
and cuts power to all system components except the computer and
monitor. See Figure 3-1 for the location of the front EMO button.
8
Electrical Cable
Safety Cover
Protects the electrical cables and pneumatic lines that run from the
lower cabinet to the servo shelf.
9 Main Air Inlet
Attachment point on the Main Air Regulator for the facility
pressurized air supply hose.
10 Rear Cabinet Door
Allows access to the electrical, pneumatic, and mechanical
components inside.
Only trained service technicians should remove this cover.
Refer to Section 2 – Safety for electrical safety information.
11 Main Power Inlet
Connector for the main power cable. Connects to the power
manager.