Owner manual

Safety 2-15

5. Disconnect the main power cable.

6. Disconnect the facility pressurized air supply hose from the main air inlet.

7. Place a warning tag on the main air inlet.

To restore system to operating condition after servicing is complete:

1. Visually inspect the dispensing system to ensure the following:

• All personnel are safely clear of the operating area

• A equipment components, covers, and guards are in place

• All tools or debris are removed

2. Remove padlock and warning tags.

3. Reconnect facility pressurized air supply hose to the main air regulator.

4. Switch the main circuit breaker

ON (l).

Item Description Item Description

1 Locking Flange 4 Main Air Inlet

2 Main Circuit Breaker 5 Warning Tags

3 Padlock (or other locking device)

Figure 2-6 System Lockout