Owner manual

Safety 2-13
2.9 Laser Radiation
WARNING! The LK Series Height Sensor contains a Class 2 laser. DO NOT look directly at
the laser beam. Looking directly at the laser beam may result in serious eye
injury.
If your X-1000 Series Dispensing System is equipped with the optional laser height sensor (Figure 2-5),
the following safety precautions should be observed in addition to the basic system safety precautions:
• Operate the laser height sensor in accordance with the operator’s manual included with the
equipment. Failure to do so may result in injury due to exposure to the laser beam.
• Do not disassemble the sensor head. Laser emission from the height sensor is not
automatically stopped if the sensor head is disassembled.
• DO NOT look directly at the laser beam or its reflection.
• Wear protective goggles when using the laser height sensor.
• Check the laser beam path. Do not install the height sensor in such a way that the laser beam
passes at eye height.
• Do not open the hatch while the laser is on.
 NOTE The laser beam is not harmful to the skin so there is no danger in exposing arms or hands
to the beam. The only possible health hazard is in exposing the eyes to the laser beam.
Refer to Section 7 – Specifications for more information.
Figure 2-5 Laser Height Sensor