Owner manual

Safety 2-7

2.5 Emergency Shutdown

Your Axiom X-1000 Series Dispensing System features EMO buttons that the operator or service

technician can use to immediately stop all dispensing operations in case of emergency. This feature helps

prevent injury to personnel and damage to the dispensing system and workpieces being processed.

Your dispensing system has two EMO buttons. One EMO button is located on the operator’s console, and

the second is located on the rear panel of the dispensing system (see Figure 2-3). The EMO vents all

pressure in the pneumatic system, de-energizes the servo power supply capacitors, and cuts power to all

system components except the computer and monitor.

 NOTE If the operator or technician is unable to reach the EMO button, the main circuit breaker

(Figure 3-6) can be used for emergency shutdown, but doing this will also shut down the

computer.

Item Description

1 Front EMO Button

2 Rear EMO Button

Figure 2-3 EMO Locations