Owner manual

2-4 Safety
2.4 Safety Warning Labels
WARNING! CAUTION!
Comply with all safety warning labels or serious injury to personnel or damage to
the dispensing system will occur. Worn or damaged labels should be replaced
with new labels having the same part number.
Warning labels on your Axiom X-1000 Series Dispensing System point out areas where personnel must
use extreme caution to prevent serious injury and property damage. Table 2-1 shows the warning symbols
that may be found on your dispensing system or optional equipment.
The location of warning labels found on a typical Axiom X-1000 Series Dispensing System is shown in
Figure 2-1 and Figure 2-2.
Table 2-1 Safety Warning Symbols
Warning Type Symbol Part Number Hazard
Electrical
(Shock Hazard)
70-0116-00
(1)
or
70-0050-00
(2)
This label warns of a high-voltage component that can
cause shock, burn, or death. Use extreme caution
when working in or around these areas.
Disconnect and lock out power before servicing.
Hot Surface
(Thermal Hazard)
70-0121-00
(1)
or
70-2150-00
(2)
This label warns of a potentially hot component or
surface that can cause severe burns.
Disconnect and lock out power before servicing.
Use thermal protection or allow heaters to cool before
performing service or maintenance in these areas.
Fuse
(Fire Hazard)
70-0119-00
(1)
or
196667
(2)
This label warns of a fuse requirement that, if not met,
can cause fire or severe damage to the equipment.
For protection against risk of fire, replace a fuse with
one having the same type and current rating.
Disconnect and lock out power before servicing.
Heavy Object
(Lifting Hazard)
70-0118-00
(1)
or
196666
(2)
This label warns that the labeled component is heavy
and can cause muscle strain or back injury to
personnel trying to lift it.
Class 2 Laser
Radiation
Warning
7201438
(1)
This label appears on the optional laser height sensor.
The label warns the user to avoid looking directly at
the laser beam.
Notes: (1) Rectangular labels with symbol and text.
(2) Triangular labels with symbol only.