Owner manual

Specifications 7-11
Table 7-8 Height Sensor Specifications
Characteristic Specification
Mechanical:
Repeatability 25 microns @ 25 mm/s (0.001” at 1 in./s), 3 sigma
± 0.025 mm (0.001 in.)
Probe Activation Force 5 grams (0.17 oz.) approximate
Probe Tip Diameter 0.51 mm (0.02 in.)
Probe Retract 10 mm (0.2 in.) (adjustable)
Z-axis Acceleration 762 cm/sec
2
(300 in/sec
2
)
LK Series Laser:
Classification Class 2 Laser, maximum output 0.95 mW
Repeatability 25 microns @ 25 mm/s (0.001 in. at 1 in./s), 3 sigma
± 0.025 mm (0.001 in.)
Light Source
Red semiconductor laser, wavelength (
λ) = 670 nm
Maximum Output 0.95 mW
Spot Diameter 70 microns at reference distance
Reference Distance
and Range
80 mm ±15 mm (3.1 ±0.6 in.)
Environmental Range 0 to 50 °C (0–122°F)
0 to 85% RH
Ambient Light 10,000 lux maximum
Life Expectancy of
Laser Diode
35,000 hours
Note: Refer to 3.7 Height Sensor for additional information.
Table 7-9 Needle Sensor Specifications
Characteristic Specification
Needle Length
(minimum)
3.2 mm (0.125 in.)
Needle Diameter
(minimum)
32 gauge
Accuracy
X-Y:
± 0.127 mm (± 0.005 in.)
Z:
± 0.125 mm (± 0.002 in.)
Repeatability
X-Y:
± 0.051 mm (± 0.002 in.)
Z:
± 0.051 mm (± 0.002 in.)
Note: Refer to 3.8 Needle Sensor for additional information.