Owner manual

Introduction 1-3
Table 1-1 System Configurations: Axiom X-1000 Series
Features
Model
X-1010 X-1020
Applications Surface Mount, Solder Paste, Silver Epoxy Flip Chip Underfill, Dam & Fill, Cavity Fill
Recommended
Dispensing
Valve Series
DJ-9000, DV-7000
Dual Valve Combinations (option)
DP-3000, DJ-9000, DV-8000
Dual Valve Combinations (option)
Conveyor
• Control by Conveyor Controller
• SMEMA Compliant
• O-ring Drive
• Motorized Rail Spacing
• Board Edge Clamp
• 2 Stations
• Under-the-Rail Board Sensors at All
Stations
• Over-the-Rail Stop Pins
• Control by Conveyor Controller
• SMEMA Compliant
• O-ring Drive
• Motorized Rail Spacing
• 3-Lift Tables Standard for Tooling
Engagement
• 3 Stations
• Fiber-optic Over-the-Rail Board
Sensors at All Stations
• Over-the-Rail Stop Pins
Needle Heater
DJ-9000 Valve:
Built-in RTD-type.
DV Series Valve:
RTD-type with typical
temperature range of ambient to 70 °C
(158 °F).
DJ-9000 Valve:
Built-in RTD-type.
DV & DP Series Valves:
RTD-type with
typical temperature range of ambient to
70 °C (158 °F).
Weigh Station Option Standard
Height Sensor
Standard: Slim Line Retractable Tactile
Option: Laser
Needle Sensor
Standard
Low Air
Pressure Alarm
Purge Station
Vision System
Type: Automatic Pattern Recognition
Camera: Miniature, High Resolution with 12.7 mm (0.5-inch) Image Size
Lighting: Red & Blue Variable Diffuse On-Axis LED Through Lens
Computer
System
CPU: Celeron PC with 88.9-mm (3.5-in.) floppy and CD-RW drives and Ethernet
network port
Monitor: 307-mm (12.1-in.) color LCD flat-panel display
Keyboard: ASCII
Operating
Software
Fluidmove for Windows (NT or XP)
Options
• Dual-Action Dispensing Head
• Low Fluid Sensor (magnetic or
capacitive)
• Contact or Impingement Substrate
Heating (X-1020 only)
• CADImport (X-1010 only)
• SECS-GEM Interface for Fluidmove
• Free-Standing Loaders (upstream and
downstream)
• Under-board Support (X-1010 only)