Owner manual

Specifications 7-9
Table 7-6 Computer and User Interface Specifications
Characteristic Specification
Computer
≥500 MHz Celeron PC typically configured as follows:
• ≥ 64 MB RAM
• ≥ 20 GB hard drive
• ≥ 32X speed CD-RW drive
• Two RS232 ports
• Dual port RAM card (ISA)
• Servo controller card (8 axes)
• Video card
• 96 bit I/O card
• Controller Area Network (CAN) interface
Operating System Windows NT (FmNT)or Windows XP (FmXP)
Dispensing Software
Fluidmove for Windows NT, version 4.0 or higher
or
Fluidmove for Windows XP, version 5.0 or higher
Software Options CAD Import, SECS/GEM Interface
User Interface
• Monitor: 12.1-inch diagonal, 800 x 600 pixel SVGA resolution,
Color TFT flat panel display
• ASCII keyboard with mouse
Network Interface Card 10-100 MBS twisted pair Ethernet included
Conveyor Jog
Distance
(1)
[mm (in.)]
X-axis: 2.032 (0.080); Y-axis: 0.0254 (0.001)
X-axis: 0.0508 (0.400); Y-axis: 0.127 (0.005)
Dispensing Head Jog
Distance
(1)
[mm (in.)]
X-Y Axis: 0.0254 (0.001); Z-Axis: 0.0254 (0.001)
X-Y Axis: 1.27 (0.050) Z-Axis: 0.254 (0.100)
Dispensing Head Jog
Velocity
(2)
[mm/sec (in./sec)]
X-Y Axis: 2.54 (0.100); Z-Axis: 1.27 (0.050)
X-Y Axis: 88.9 (3.50); Z-Axis: 10.16 (0.40)
Notes: (1) Default distances per mouse click on the arrow button using Fluidmove
position controls. Refer to the applicable Fluidmove User Guide or Online
Help to modify.
(2) Default velocities per mouse click on the arrow button using Fluidmove
position controls. Refer to the applicable Fluidmove User Guide or Online
Help to modify.