Owner manual

7-8 Specifications
Table 7-5 Positioner System Specifications
Characteristic Specification
X-Y Motion Type Brushless DC servomotor, low inertia, closed-loop,
high-resolution cable drive with multi-encoder feedback
Z Motion Type Brushless DC servomotor, rack and pinion with precision
encoder feedback
X-Y Acceleration 1.0 g peak with S-curve jerk control
X-Y Velocity (maximum) 1.0 m/sec (40 in./sec)
X-Y Travel 500.4 x 541.0 mm (19.7 x 21.3 in.)
Z Travel 89 mm (3.5 in.) maximum; typical configuration with
DOAL and without needle installed; actual Z travel is
application dependent
Positioner Resolution
(1)
0.025 mm (0.001 in.)
X-Y Accuracy
(2)
±0.076 mm (±0.003 in.), 3 sigma
(4)
X-Y Repeatability
(3)
±0.025 mm (±0.001 in.)
Notes: (1) Smallest step movement of the mechanics.
(2) Precision with which the positioner can move to a point given the X-Y coordinates.
(3) Ability of the positioner to return to the same taught X-Y coordinates when coming from the
same direction.
(4) Sigma is achieved using Fluidmove standard mode.