Owner manual

Specifications 7-1
7 Specifications
7.1 Overview
This section contains specifications for Axiom X-1010 and Axiom X-1020 Dispensing Systems. These
specifications are intended as a convenient reference for personnel planning system relocation,
installation, or operation, and other persons that may have an interest in system performance
characteristics. This section provides specifications for the following:
• Facility Requirements Table 7-1
• Dispensing System Dimensions (Typical) Figure 7-1
• Dispensing System Service Area Dimensions Figure 7-2
• Center of Gravity Figure 7-3
• System Performance Metrics Table 7-2
• Dispensing Valve-Related Specifications Table 7-3
• Scale Specifications (X-1020) Table 7-4
• Positioner System Specifications Table 7-5
• Computer and User Interface Specifications Table 7-6
• Vision System Specifications Table 7-7
• Height Sensor Specifications Table 7-8
• Needle Sensor Specifications Table 7-9
• Fluid Heater Specifications Table 7-10
• Heater Tooling Specifications Table 7-11
• Conveyor Specifications Table 7-12
7.2 Safety First
Familiarity with the performance specifications and facility requirements in this section can provide
information leading to safe operation of the dispensing system. For additional safety information, refer to
the Section 2 - Safety.