Owner manual

Troubleshooting 5-1
5 Troubleshooting
5.1 Overview
If you have difficulty operating your dispensing system, use this section to identify a possible solution to
the problem. If you have difficulties not listed in this section, or the suggested solution does not correct
the problem, contact Asymtek Technical Support. This section provides troubleshooting information for
the following:
•
Software • Needle Heater
•
Overall System
•
Conveyor
• Vision System • Heater Tooling
•
Height Sensor
•
Dispensing Head
•
Needle Sensor
5.2 Safety First
It is essential that you follow all safety warnings and consider all safety warning labels when performing
the troubleshooting procedures. Refer to Section 2 – Safety for additional information.
WARNING! CAUTION!
Only qualified personnel should perform troubleshooting tasks. Follow the safety
instructions in this manual and all other related documentation. Failure to do so
may cause serious bodily injury to the user or damage to the equipment.