Owner manual

Operation 4-33
4.9 Consumables
Consumables are operational support materials for the dispensing process that are discarded after use.
WARNING! Consumable materials must be discarded in accordance with local regulations,
material manufacturer MSDS recommendations, and facility practice.
The items listed in Table 4-8 are consumable materials for the Axiom X-1000 Series Dispensing System
that can be ordered from Asymtek or an authorized distributor. Procedures for replacement of purge
boots, cups, and banjo wipers can be found in Section 6 – Maintenance. Replacement procedures for
dispensing needles or nozzles are found in the applicable dispensing valve manual.
TIP To prevent unnecessary production delays, we recommend that you maintain a supply of
these consumable items on hand.
Table 4-8 Asymtek Consumable Products
Item
(1)
Part Number
Conveyor Belt, Lead Frame
(2)
01-0306-00
Boot, Vacuum, 0.045 in. ID, Green 01-0018-00
Boot, Vacuum, 0.020 in. ID, Orange 01-0019-00
Boot, Vacuum, 0.031 in. ID, Pink 01-0021-00
Boot, Vacuum, 0.120 in. ID, Olive 01-0022-00
Dixie Cups, 1 oz., 200/package 58-0030
Dixie Cup Lid 58-0032
Banjo Wiper (1.25 in.) 02-1570-03
Needles/Nozzles
(3)
Notes: (1) Except for Dixie Cups, all items are one item per part number.
(2) Two required. Both belts should be changed at the same time.
(3) Refer to the applicable dispensing valve manual or contact
Asymtek.
The following consumable items can be obtained from your local manufacturing materials supplier:
• Latex Gloves
• Small Bottle Brushes
• Isopropyl Alcohol (IPA)
• MSDS-recommended Solvents
• Shop Cloths
• Various Types of Fluid Syringes