Quick Operations Owner's manual

Maintenance 5-1
5 Maintenance
This section contains the recommended scheduled, routine, and preventive maintenance procedures for your
Axiom X-1000 Series Dispensing System. Performing the recommended maintenance procedures at the
intervals suggested in this section will increase system life and ensure high quality dispensing performance
for every production run.
Machine Status
Unless otherwise specified, the dispensing system may be left powered ON while performing the following
maintenance procedures. Lifting the Hatch to access the dispensing area will automatically activate the
Safety Interlock putting the system in a low-power state.
CAUTION!
Avoid opening the Hatch while a dispensing program is running or the workpiece
may be not be completely dispensed.
Hazardous Materials
Some maintenance procedures involve the use of hazardous materials. Always follow all applicable national
and local statutes and regulations, facility safety practice, and the material manufacturer's Material Safety
Data Sheet (MSDS) recommendations including:
Personal protective equipment (such as rubber gloves, safety glasses, thermal gloves)
Disposal of contaminated items (such as purge boots, fluid syringes, cleaning cloths)
Disposal of hazardous materials (such as cleaning agents, dispensing fluid, lubricants)
Treatment of injury to personnel
Material flammability
WARNING!
CAUTION!
A trained service technician must perform any maintenance or servicing not included
in this section.